Metal Roof Repair Services

A metal roof holds up well, but it doesn’t stay perfect forever. Fasteners back out, seams open up, and roof coatings eventually wear thin. That’s where we come in. Our team handles metal roof repair on everything from single-story homes to high-rise commercial buildings, using methods that match the specific system and the way it was built. With years of hands-on work across industrial properties, retail centers, and custom homes, we know exactly how a metal roof ages and how to bring it back to full strength.

Get A Free Roof Quote

Residential Metal Roofing

Homes with metal roofing often deal with issues that start small but spread quickly if left unchecked. Common residential problems include loose fasteners, worn sealant, panel lift from wind, and leaks around chimneys, vents, and skylights. Some metal roofs also show movement or popping noises from thermal expansion. We locate the exact cause of the issue and make targeted repairs that stop leaks, prevent rust from worsening, and extend the life of the entire system. Most residential metal roof issues can be repaired without replacing the roof.

Commercial Metal Roof Roofing

Commercial metal roofing requires a different level of care due to its size, layout, and exposure to equipment and foot traffic. Leaks often form at seams, fasteners, HVAC curbs, wall transitions, and penetrations. Wind uplift, open laps, and rusted panels are also common on commercial buildings, especially on low-slope roofs. We make repairs with minimal disruption to tenants and operations, and we schedule work around business hours whenever needed. Large commercial buildings, warehouses, and high-rises require experienced crews, proper safety equipment, and consistent communication; this is where our team excels.

Types of Metal Roofs We Service

We repair metal roofs across all parts of South Florida, from inland neighborhoods to coastal buildings that take the full hit of salty air. Whether your property uses aluminum for corrosion resistance or galvalume for strength and longevity, our team knows how to service and protect these products.

Standing Seam Roofing

These roofs expand and contract with temperature changes, which can cause seams to open or clips to loosen over time. We tighten, reseal, and realign roof panels so the system stays watertight and performs the way it was designed.

Corrugated Sheet Metal

Corrugated sheet metal often leaks at fasteners, laps, and wall transitions. We replace worn screws, reinforce seams, and correct flashing issues to stop leaks before they spread through the building.

Low-Slope Commercial Panels

Low-slope metal roofing faces different challenges, especially around HVAC units, curbs, and long panel runs. We repair seam separation, rusted fasteners, and ponding-related issues with materials suited for commercial environments.

Our Roofing Services Process

We follow a precise roof repair process to ensure long-lasting results:

Inspection and Evaluation
We check fasteners, seams, flashing, penetrations, and moisture levels.
Identify the Root Cause
We determine why the leak started and what needs correction.
Fastener Repair or Replacement
Loose or damaged screws and washers are removed and replaced.
Seam and Flashing Repair
We reinforce roof seams, replace worn flashing, and stop water entry points.
Panel Replacement if Needed
A rusted or severely damaged panel is removed and replaced.
Sealant and Butyl Application
We use professional-grade sealants designed for metal roofs and Florida conditions.
Final Leak Check
We test repaired areas to confirm the system is watertight.

When Maintenance Is Enough vs. When Replacement Is Needed

Most metal roofs can be repaired successfully.

Metal roof repair services are usually the right choice when:

- The panels are still structurally sound.
- Rust is minimal.
- Leaks are limited to specific roof areas.
- Fasteners or flashing are the primary issue.

Roof replacement may be recommended when:

Rust has spread across large areas.
The roof has widespread installation errors.
Multiple leaks indicate system failure.
The roof has exceeded its life expectancy.

We provide a clear explanation and show you photos so you know exactly where your roof stands.

Our Roofing Services Process

We follow a precise roof repair process to ensure long-lasting results:

Inspection and Evaluation
We check fasteners, seams, flashing, penetrations, and moisture levels.
Identify the Root Cause
We determine why the leak started and what needs correction.
Fastener Repair or Replacement
Loose or damaged screws and washers are removed and replaced.
Seam and Flashing Repair
We reinforce roof seams, replace worn flashing, and stop water entry points.
Panel Replacement if Needed
A rusted or severely damaged panel is removed and replaced.
Sealant and Butyl Application
We use professional-grade sealants designed for metal roofs and Florida conditions.
Final Leak Check
We test repaired areas to confirm the system is watertight.

When Maintenance Is Enough vs. When Replacement Is Needed

Most metal roofs can be repaired successfully.

Metal roof repair services are usually the right choice when:

- The panels are still structurally sound.
- Rust is minimal.
- Leaks are limited to specific roof areas.
- Fasteners or flashing are the primary issue.

Roof replacement may be recommended when:

Rust has spread across large areas.
The roof has widespread installation errors.
Multiple leaks indicate system failure.
The roof has exceeded its life expectancy.

We provide a clear explanation and show you photos so you know exactly where your roof stands.

Why Customers Choose Phoenix Roofing for Roof Repairs

Phoenix Roofing brings years of hands-on experience working on metal roofing in some of South Florida’s most demanding environments. Our crews repair roofing on high-rises exposed to coastal wind, industrial facilities with constant foot traffic, and residential properties that need precise leak tracing and long-term protection.

Every technician on our metal roofing team is manufacturer-trained, OSHA-certified, and familiar with the exact failure points unique to aluminum, steel, and galvalume systems in Florida’s climate.

As a BBB-accredited and manufacturer-certified contractor, we follow strict repair protocols, use premium materials designed for salt, heat, and storm exposure, and document every step of the work. This combination of technical skill, safety standards, and coastal experience allows us to deliver roofing services that hold up long after the storm season ends.

Schedule Your Metal Roof Repair Assessment

If your metal roof is leaking, showing signs of wear, or approaching the end of its expected lifespan, our team is ready to help. Contact Phoenix Roofing for a detailed inspection and a clear, straightforward metal roof repair plan.

Get A Free Roof Inspection

(954) 304-9422